, Portable Sandblasting
, Cleaning
, Industry
, Nautical
, Bodywork
Transformer 24/90/130
The Transformer 24/90/130 litre sandblaster was developed to combine the practicality of a compact free-blasting sandblaster with the autonomy of a higher-capacity machine.
The main 24-litre tank forms the base of the machine. Removable additional tanks can be added to this system, increasing the operating capacity up to 90 or 130 litres.
This configuration makes Transformer particularly interesting for those who work in different environments and need an adaptable machine: compact when greater handling practicality is required, more capacious when the job requires continuity and autonomy.
The possibility of quickly changing the sandblaster configuration allows work times, abrasive consumption and job-site organization to be managed more effectively, improving the efficiency of the operation.
Applications of the Transformer sandblaster
Vehicle restoration and bodywork
Transformer can be used for removing rust, old paint, oxidation and residues from frames, metal components, bodywork parts and vehicles to be restored.
The possibility of choosing the most suitable configuration allows both localized operations and more extensive work to be carried out, maintaining a good balance between autonomy and practicality.
Industrial maintenance
In industrial applications, Transformer is suitable for treating metal structures, metalwork, machinery, equipment, oxidized supports and components subject to wear or deteriorated coatings.
Variable capacity is useful when the job requires continuity, especially on large surfaces or in contexts where reducing abrasive refill stops represents an operational advantage.
Construction and job sites
In the construction sector, the Transformer sandblaster can be used for operations on concrete, stone, plaster, brick, metal elements, exposed structures and surfaces to be prepared before new finishing or protective cycles.
The modular configuration allows the machine to be adapted to job sites of different sizes, from localized work to more continuous operations.
Marine applications
In the marine sector, Transformer can be used for work on metal surfaces, components, structures and parts that require the removal of residues, oxidation, old coatings or preparation before subsequent treatments.
Greater autonomy can be useful when the operation requires extended working times and operational continuity.
Professional free-blasting abrasive operations
Transformer is suitable for all situations where a pressure sandblaster with free-blasting abrasive is required, to be configured according to the surface, type of abrasive, working pressure and required productivity level.
Why choose Transformer 24/90/130
Variable autonomy from 24 to 130 litres
The main strength of the Transformer sandblaster is the possibility of working with three levels of autonomy: basic 24-litre configuration, intermediate configuration up to 90 litres and extended configuration up to 130 litres.
This allows the same machine to be used in different contexts, choosing the most efficient configuration each time.
Removable additional tanks
The additional tanks can be installed or removed according to operating needs.
The operator can therefore increase the sandblaster capacity when the job requires more abrasive and return to the compact configuration when greater handling practicality is needed.
Greater continuity in prolonged work
In extensive operations, the increased capacity reduces interruptions caused by tank refilling.
This allows smoother work management and improves the overall productivity of the operation.
Adaptability to the type of job site
Transformer is designed for those who work in different environments: workshops, job sites, industrial areas, outdoor spaces, maintenance on structures and restoration operations.
The variable configuration allows the most suitable compromise to be chosen between autonomy, overall dimensions, operating weight and practicality.
Professional structure for intensive use
The machine is built for professional operations and for use with abrasives suitable for free-blasting sandblasting.
Components, tank, hoses and control system must be correctly configured according to the work to be carried out.
Solution for those looking for a modular machine
Transformer is particularly suitable for those who do not want to choose between a compact sandblaster and a high-autonomy machine, but are looking for a modular system capable of adapting to multiple usage scenarios.
Watch Transformer 24/90/130 in modular configuration.
Main components of Transformer 24/90/130
The Transformer sandblaster consists of a main sandblasting unit with a 24-litre pressure tank and removable additional tanks that allow the machine’s autonomy to be increased.
The structure is designed to allow the installation of additional modules above the machine body, maintaining a stable configuration suitable for professional use.
Sandblasting unit
The sandblasting unit is the heart of the Transformer.
The basic 24-litre tank allows the machine to be used in its most compact configuration, ideal when the job requires rapid intervention, reduced overall dimensions and easier handling.
The remote control on the handle allows the operator to manage jet activation more practically and safely during operation.
Gun body
The gun body allows the outgoing abrasive jet to be controlled and must be selected and adjusted according to the abrasive, operating pressure, available compressor and type of surface to be treated.
Correct gun body configuration contributes to jet continuity, processing quality and abrasive consumption management.
66-litre additional tank
The 66-litre additional tank allows the overall autonomy of the sandblaster to be increased up to approximately 90 litres.
This configuration is useful when the job requires a larger quantity of abrasive than the basic configuration, while still keeping the machine relatively compact and practical to manage.
106-litre additional tank
The 106-litre additional tank allows the overall autonomy of the Transformer to be increased up to approximately 130 litres.
This configuration is suitable for more extensive operations, demanding job sites and work where reducing the number of abrasive refill stops is important.
Tank coupling system
The coupling system allows the additional tanks to be installed above the machine body, increasing the sandblaster capacity in a practical way.
This solution allows the machine to be quickly transformed according to the type of job: compact configuration for shorter operations, extended configuration for prolonged work.
Anti-abrasive hose and nozzle
The anti-abrasive hose and nozzle are fundamental elements for sandblasting performance.
Nozzle diameter, hose length, available air flow rate, working pressure and type of abrasive directly affect productivity, jet continuity and the result on the surface.
For this reason, before use it is important to check the correct combination of sandblaster, compressor, abrasive and accessories.
Transformer modular configuration
Thanks to a practical coupling system, the autonomy of the sandblaster can be increased by placing different tanks above the basic 24-litre tank, multiplying autonomy up to 130 litres.
The additional structures can be used at the operator’s discretion according to the type of operation and the continuity required.
When to choose Transformer 24/90/130
Transformer is suitable when a professional free-blasting sandblaster is required, capable of adapting to different operating contexts without the need to use separate machines.
- • localized work with compact configuration
- • larger job sites with greater abrasive autonomy
- • continuous professional operations
- • industrial maintenance and metal structures
- • restoration and bodywork
- • construction and mineral surfaces
- • operations where reducing downtime for refilling is important
Usage recommendations
To obtain the best result with Transformer 24/90/130, it is important to define in advance:
- • the type of surface to be treated
- • the material to be removed
- • the required level of aggressiveness
- • the most suitable type of abrasive
- • the working pressure
- • the nozzle diameter
- • the available air flow rate
- • the most suitable configuration between 24, 90 or 130 litres
For localized work or where space is limited, it may be preferable to use the basic 24-litre configuration.
For continuous work, on larger surfaces or with higher abrasive consumption, installing the additional tanks may be more advantageous.
Periodic maintenance of the nozzle, gun, hose, fittings, valves and components subject to wear is essential to keep the machine’s performance consistent.
FAQ about the Transformer 24/90/130 sandblaster
What type of sandblaster is Transformer 24/90/130?
Read the answer
Transformer 24/90/130 is a professional free-blasting sandblaster with a basic 24-litre tank and removable additional tanks that allow autonomy to be increased up to 90 or 130 litres.
What is the main advantage of the Transformer sandblaster?
Read the answer
The main advantage is the modular configuration.
The same machine can be used in compact version or with greater autonomy according to the type of work and the duration of the operation.
When is the 24-litre configuration convenient?
Read the answer
The 24-litre configuration is suitable for shorter operations, localized work, limited spaces or situations where it is important to keep the machine more compact and easier to move.
When is it useful to increase autonomy up to 90 or 130 litres?
Read the answer
Greater autonomy is useful for prolonged work, on large surfaces or when reducing the number of interruptions for abrasive refilling is desired.
Is Transformer suitable for construction and job sites?
Read the answer
Yes. Transformer can be used in construction for operations on mineral surfaces, metal elements, structures, plaster, stone, concrete and substrates to be prepared before subsequent treatments.
Can Transformer be used on metal and bodywork?
Read the answer
Yes. The machine can be used to remove rust, oxidation, old paint and surface residues from metal, structures and components by correctly selecting abrasive, pressure and nozzle.
Which compressor is required to use Transformer?
Read the answer
The choice of compressor depends on nozzle diameter, working pressure, abrasive, hose length and required continuity.
For correct use, it is advisable to check the configuration with FEVI.
Are the additional tanks always necessary?
Read the answer
No. The additional tanks are used when greater autonomy is required.
For short or localized work, the basic 24-litre configuration may be sufficient.
Is Transformer suitable for professional use?
Read the answer
Yes. Transformer is designed for professional use in maintenance, construction, industry, bodywork, marine applications and free-blasting sandblasting operations where strength and operational flexibility are required.
Why choose Transformer instead of a sandblaster with a fixed tank?
Read the answer
Because Transformer offers greater adaptability.
A sandblaster with a fixed tank requires always working with the same capacity, while Transformer allows the most suitable autonomy to be chosen according to the work to be carried out.
